Standard Flange Gaskets

Style 1130 - Full Face Gaskets for 300 lb ASME/ANSI Pipe Flanges

Phelps carries large inventory of gasket material for a wide range of application in many industries including water treatment, refineries, food processing, power plants, and other industrial applications. Although 1/8" and 1/16" are the most commonly ordered thickess, we carry a wide range of thickness to choose from.

Phelps Style 1115 and 1130 (Standard ASME Flange, Full-Face Gaskets)

Main Steam Flanges Potable Water Pumps Sludge, Slurry, & Sewage Pumps Connecting ANSI Standard Flange Pipes Recycling water from Mining, Petrochemicals, Power Plants, Consumer Waste

Commonly Ordered Materials

Ethylene Propylene, EPDM

Washers, seals, and gaskets
Silos & storage tank seals
Weather stripping & roofing material
Bumpers, architectural & window seals
Medical equipment seals, electrical connector seals
Condensate tubing for HVAC equipment, Compressor Grommets
Seals for electronics & electrical equipment, and outdoor electrical enclosures

-40°F/-40°C to 250°F/121°C
50 through 70

50 Durometer: ASTM D 2000 3BA 508 C12, SAE J200 3BA 508 C12, MIL R-3065 RS 508 C1
60 Durometer: ASTM D 2000 3BA 608 C12, SAE J200 3BA 608 C12, MIL R-3065 RS 608 C1
70 Durometer: ASTM D 2000 3BA 708 C12, SAE J200 3BA 708 C12, MIL R-3065 RS 708 C1

300% - 150% minimum (depending on durometers 50 through 70)
800 PSI minimum
Compatible exposure
Chlorine, salt water, MEK
Ozone, UV, saltwater and weather.
Water, steam, and oxidating environments
Very good low temperature flexibility
Good impact and abrasion resistance
Hydraulic phosphates and silicates, alkali, acids depending upon type and strength
2.5 lb (50 durometer EPDM)
2.6 lb (60 durometer EPDM)
2.7 lb (70 durometer EPDM)
Back to Top