FAQ | Gasket Material Stripped
Gasket Material Stripped FAQs
What problems can be caused by Pressure Spikes?Does the use of (Heat) Traced Lines affect the gasket joint?
How do I fill a large gap in flanges? Can I stack gaskets? (Spacers in Flanges)
What do I need to be concerned with when Gaskets are installed in Grooves or recesses?
What are Gasket Constants?
What is a Full Face Gasket?
What is the difference between EP, EPR, and EPDM?
Why it is not recommended to apply pressure-sensitive adhesives onto solid EPDM rubber, low durometer (10 to 40 Shore A) Neoprene and Buna-N?
- What problems can be caused by Pressure Spikes?
Related: GasketsVery high pressure spikes can occur in any line pumping a liquid if a valve is closed rapidly, leaving the fluid flow nowhere to go. The inertia of th Read more...
- Does the use of (Heat) Traced Lines affect the gasket joint?
Heat traced lines pumping materials can present a number of problems for gaskets: The bolts are usually hotter than the flanges since the heat is a Read more...
- How do I fill a large gap in flanges? Can I stack gaskets? (Spacers in Flanges)
We understand that some installations require a very thick gasket to fill a large gap between flanges. In such scenarios, we do not recommend stacking Read more...
- What do I need to be concerned with when Gaskets are installed in Grooves or recesses?
Gaskets installed in grooves or tongue and groove flanges require one extra consideration: the compressed height of the gasket must be considered. Thi Read more...
- What are Gasket Constants?
The ASME and ASTM committees are working on a new system and new set of numbers to be used in the ASME code calculations for flange design. These new Read more...
- What is a Full Face Gasket?
Related: Standard Flange GasketsA full face gasket covers the entire flange face and includes bolt holes, typically used in flat faced flanges. A gasket for a raised face flange is t Read more...
- What is the difference between EP, EPR, and EPDM?
Related: ElastomersEPR is an abbreviation for Ethylene-propylene copolymer, while EPDM is an abbreviation for Ethylene-Propylene Terpolymer. From a functional standp Read more...
- Why it is not recommended to apply pressure-sensitive adhesives onto solid EPDM rubber, low durometer (10 to 40 Shore A) Neoprene and Buna-N?
Related: ElastomersEPDM compounds often contain certain chemical additives, such as paraffins, which migrate to the surface over time. When this happens, an adhesive bac Read more...